14 best shower standing handles and how to install

Shower standing handle and tub safety handles are installed on your shower wall to improve balance and reduce the risk of falling in the shower or tub. The bathroom can be a perilous place to be injured, so it’s important to take measures to prevent injuries from happening in the first place. Installing a shower standing handle can help you with that—these are the 12 best models on the market today!
Choosing the Correct Shower Standing Handle
Find the best shower standing handle bar for you, consider your height, weight, and whether you want suction cups or a curve grab bar. The heavier someone is, the more they need extra support while standing in a shower standing handles or bathtub, and the stronger the weight limit should be on the handle. Suction cups are good for people with limited mobility because it’s easy to take them off if necessary. Most also come with other features like hooks for soaps and handles for balance.
What Is the Best Size for a Shower Standing Handle?
To pick the best size of shower standing handle, it is important to consider the space available in your bathroom. A 12-inch long handle will work in a standard bathtub or shower stall with room for an additional five inches on either side. A 24-inch long handle will fit well in a larger shower with a larger footprint. If you have a smaller space, try using safety rails instead!
What is the Correct Height for a Shower Standing Handle?
Your height should be between 250-500 pounds when showering or bathing. Ensure the stand is long enough for you (ex: over 42 inches). A shorter shower standing handle will not provide safety if you need help showering. A stand will only be safe if it has a rubber suction grip, which is also easy to install.
Should Grab Bars be Vertical or Horizontal?
There are two major types of shower standing handle suction grab bars and safety grab bars. Safety grab bars work well for people who need physical support in a bathroom or tub. These shower handles are typically affixed with screws to the wall; some users may find that these grab bars can leave a noticeable mark on the wall as they remove them when finished using them. Suction devices are more popular because they don’t leave a hole in the drywall.
How Much Weight Will a Grab Bar Hold?
A bathroom grab bar should be able to support at least 250 pounds. Grab bars are an important part of physical therapy that helps people remain stable when standing. If you’ve ever thought about installing a grab bar in your bathroom, the first question is, how much weight do I need it to hold? Here’s the quick answer! It all depends on where you plan on installing the grab bar. A tub or shower with a flat bottom surface can usually hold up to 500 pounds; however, if there is no flat surface, it will only be able to withstand around 250 pounds.
14 Permanent Shower Handles
Installing a suction shower standing handle is one of the best ways to create stability when someone needs help standing or sitting in the shower. Here are 14 shower handles that are easy to install, with full instructions for each.
- Slide-n-Lock Suction Handle:
- Super Stick Suction Handle:
- Permanent Hook Handle:
- Universal Non-Slip Floor Mat:
- Tub Wedge Stool:
- Bathmat Bench:
- Deluxe Shower Bench:
- Pull-Up Bar:
- Moen 24″ Bathroom Handle
- Invisia Grab Bars – Great for Tubs
- Moen’s Flip-Up Bathroom Grab Bar
- Gotega Two Pack Shower Grab Bar
- AquaChase Safety Grab Bar
- Curve Grab Bar by Stander
Slide-n-Lock Suction Handle
The Slide-n-Lock Suction Handle is easy to install, including hardware (screws) and a handle. It can be used with any shower door or glass surface that has not already been treated with a silicon lubricant. The biggest benefit of this device is its simplicity – the product requires no assembly and takes less than five minutes to install.
Super Stick Suction Handles
The Super Stick Suction Handle attaches firmly to the shower wall or tub, which gives support and a firm surface for the user’s hand. The non-slip grip is comfortable, non-skid, and constructed of high-quality materials. It washes easily with soap and water. It is portable for taking on vacations too!
Permanent Hook Handle
Installation is quick and easy with permanent hooks, whether a tension-mounted type attaches securely to the wall with no drilling or a drywall anchor-style hook. You’ll also need to figure out how far from the shower opening you want your handle since it needs to be close enough so you can easily reach it but not so close that you’ll bang your elbows on the tiled wall as you move around. The average distance for an installation of this kind is about 12 inches from the opening.
Universal Non-Slip Floor Mat
The non-slip surface provides a safe space that feels steady, stable, and secure. The mat will work well for anyone who needs physical support when standing or moving in the shower or tub. It can be used on wet surfaces without slipping and includes a safety grip design on the backside. It’s easy to clean with soap and water.
Tub Wedge Stool
A tub or shower stool can make a substantial difference for anyone who needs additional support, such as elders or those recovering from surgery. It can also provide a good place for kids or pets to stand in the bathtub when showering.
Bathmat Bench
Installing a bath mat bench in your shower or tub will give you another place to stand, sit, or prop up one foot. Not only is this more supportive for joints like knees and hips, but it can help balance you if you have difficulty keeping your feet on the floor while standing. Some mats are made specifically for showers with just a curb instead of walls on two sides.
Deluxe Shower Bench
The Deluxe shower bench is the perfect choice for people with limited mobility or balance and those who need a secure place to sit during showers. This sturdy bench has a padded cushion seat available in various colors, including red, navy blue, black, teal green, and orange. Made of PVC vinyl for easy cleaning with soap and water without slipping around on the floor when wet.
Pull-Up Bar
A pull-up bar will also get you feeling strong quickly. If your bathroom ceiling is high enough, installing a pull-up bar can be as easy as screwing two brackets onto the wall. You’ll then hang one thick rope or tube over the brackets and let it dangle until it’s at eye level with you.
Moen 24″ Bathroom Handle
To install a Moen 24″ Bathroom Handle, you will need a Phillips head screwdriver, pliers, an Allen wrench, and one tube of silicone sealant. First, loosen the nut on the underside of the pipe handle by turning it counterclockwise with the pliers or Allen wrench. Then use the Phillips head screwdriver to tighten two screws near each side of the handle onto pipes behind your shower or tub.
Invisia Grab Bars – Great for Tubs
Invisia is a leading manufacturer of grab bars, rails, and safety accessories. Their patented design requires no drilling or permanent installation. This adjustable safety rail can be quickly installed without needing tools or any wall mounting hardware.
Moen’s Flip-Up Bathroom Grab Bar
The Moen Flip-Up Bathroom Grab Bar is the perfect solution for a bathroom grab bar that takes up minimal space. This toilet safety handle flips up when not in use, so it is discreet when your guest leaves the bathroom. When not used, the grip can be adjusted to six angles and folds down flush with the wall. It is also ADA-compliant, meaning you do not worry about lawsuits if you choose this product. It also has a white finish which will blend into most modern bathroom decors.
Gotega Two Pack Shower Grab Bar
If you’re looking for a reliable way to help people in the shower, look no further than the Gotega shower grab bar. This grab bar attaches securely without drilling and includes rubber grips for enhanced stability and a non-slip bottom that can be trimmed down with a sharp pair of scissors. I like that this is tall enough that adults can reach their entire body, but it can also be shortened if necessary.
AquaChase Safety Grab Bar
The AquaChase Safety Grab Bar is a long, waterproof safety bar that can be installed in any bathroom, making it a great solution for home or commercial spaces. It’s designed to attach to the walls or doors of showers or bathtubs to hold an adult weight of up to 375 pounds. The handles are easily adjustable and stay locked with two brackets that fit securely onto the frame without damaging it. One button removes them when they’re not needed.
Curve Grab Bar by Stander
An easy, one-handed way to grip in the shower with a sensitive grip, strong suction cup, and secure mounting bracket. There are five installation options, including the original adhesive sticker or suction cup that sticks directly on glass surfaces like showers or tubs.
2 Removable Shower Standing Handle
For most people, showering is a simple activity performed in the comfort of one’s home. However, the process can be much more difficult for some due to mobility limitations or other disabilities. To make it easier for everyone, we compiled a list of 14 shower standing handles that range from low-tech solutions to high-tech robotic supports. Installation is fairly easy as well – depending on your current setup.
Two Piece 12″ Grab Bar Shower Standing Handle
A two-piece 12-grab bar by Universal Design Living is an excellent choice for anyone who needs a permanent installation in the shower standing handle. These bars are designed safely, as an independent laboratory has tested them at a maximum load of 300 pounds. The bars come with wall anchors and instructions for easy installation, and assembly takes about five minutes. They are made from strong materials that resist rust, mold, bacteria, and soap scum.
Heinsy Suction Portable Bathroom Bar Shower Standing Handle
To install the Heinsy Suction Portable Bathroom Bar, you can use adhesive backing or screws. This sturdy and durable bar is designed for seniors or others who need assistance in the bathroom.
How to Install Shower Standing Handle?
Grab a stud finder and follow the instructions on properly using it. Once you locate the studs, mark them with chalk or a piece of tape. Drill pilot holes through the wallboard at the mark made by the finder. Check for power and water lines. Pull wires as needed. Cut away any drywall that is in the way. Use appropriate fasteners and sealant as necessary (may vary depending on the type). Mount handles to the wall. Connect all plumbing fittings as necessary and turn the water back on.
Conclusion of shower standing handle
The 14 best shower standing handles we have reviewed should be a great place to start looking when it comes time for you to buy. We have tried to include the features, pros, cons, how they work and how they are installed in this guide so that you can decide which one is right for your needs.
FAQs
Is the shower standing handle adjustable?
The handles can be adjusted up and down for varying heights. The height adjustment ranges from 28 – 43.
Can I use this outside of the shower standing handle?
No, this product is intended for use in a shower or tub. These handles will not attach securely to non-flat surfaces like a countertop or bathtub. The weight limit for each handle is 250 pounds. Each handle has its adhesive backing, which must be installed to ensure it doesn’t slip off. Handle length: 3/4 inch to 1 1/2 inches. The long one should work on most tubs. Removing the old faucet knobs is unnecessary when installing new handles. Instead, you should unscrew them (but don’t lose them). Your local hardware store may have screws you can buy as well. One-person installation should take less than 15 minutes, but you’ll need some help installing more than one at a time. Installation only takes 5-10 minutes and requires two simple tools: a screwdriver and an adjustable wrench. Most people find that they need assistance installing their first few handles, but after that, they can install them themselves. When removing your old handles, use the screwdriver to loosen the screws and slide them out while holding onto the knob.